Berger 30 Cal 180 Gr Elite Hunter Bullets

Berger 30 Caliber 180 Grain Elite Hunter Bullets (100 ct)

Berger Elite Hunter Bullets utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth. Elite Hunter Bullets are identical in construction, shape and performance to the Berger Hybrid Target series, except they utilize a thinner J4 Precision Jacket for rapid expansion on game animals. Elite Hunters are designed to penetrate 2-3" and then begin to expand and create a massive wound cavity up to 15". The hydrostatic shock causes most animals to drop immediately.

Hybrid Ogive

Hybrid Ogives blend the best aspects of tangent and secant nose shapes into one ogive. Near the bearing surface, the shape starts off as a tangent, which makes it easy to tune, then transitions to a secant ogive, which results in a flatter trajectory and less wind drift.

Consistent Core

Our exacting core manufacturing process is one of the reasons when you buy a box of Berger, you don't have to worry about sorting by weight. This gives you more reliable drop, consistent BC, and better accuracy.

Boat Tail

Boat Tail bullets provide an aerodynamic advantage at longer ranges over their flat base counterparts, especially while transitioning from transonic to subsonic velocities.

J4 Hunting

Jacket J4 Precision Bullet Jackets are the #1 choice of custom bullet manufacturers. They are the most consistent and concentric copper jackets in the world holding an unprecedented +/- .0003" tolerance. J4 hunting jackets are produced slightly thinner to allow for 2-3"" of penetration before rapidly expanding, producing extreme hydrostatic shock and a massive wound cavity.

• Berger Part #30554
• Box Count 100
• G1 BC 0.576
• G7 BC 0.295
• Minimum Twist Rate 1:12"
• Box Weight 2.68
• Box Dimensions 3.4 x 3.4 x 1.7
• Ogive Style Elite Hunter Hybrid
• Base Style Boat Tail
• Jacket J4 Hunting Jacket
• Sectional Density 0.271
• Bullet Dia. 0.308
• OAL 1.375
• Base to Ogive 0.641
• Nose Length 0.782
• Bearing Surface 0.373
• Boat Tail Length 0.202