300 PRC Redding Type S Match Bushing 3-Die Neck Sizer Set
The Redding Type S Match Bushing 3-Die Neck Sizer Die Set includes a Type S Match Bushing Neck Sizing Die, a Body Die and a Competition Seating Die with micrometer depth seating and a sliding sleeve. The Type Bushing Neck Sizing Die allows you to select a bushing available in .001” increments for use in neck sizing. This lets the reloader determine and control the amount of external neck sizing. The body die allows you to size the body of the case to adjust headspace or shoulder bump. The Competition Seater allows the reloader to accurately seat bullets consistently and with improved concentricity. Bushings and shellholder are sold separately.
Includes:
- One Redding Type S Bushing Neck Sizing Die which includes a decapping rod, a standard sizing button, and a decapping pin retainer to use in place of the button for those choosing to only externally size their brass. 17 caliber versions only include a sizing button and no retainer due to physical limitations.
- One Redding Competition Bullet Seating Die including the sliding sleeve and the micrometer adjusting head
- One Redding Body Die for use in full-length resizing. Does not feature or include a decapping rod.
- One die box
- Complete Instructions
- Bushings and shellholder sold separately
Features:
- Ability to control the amount of external neck sizing by choosing bushings available in .001” increments. Bushings sold separately.
- Bushings self-center in sizing die to improve concentricity
- Adjustable decapping rod on the neck sizing die allows the user to adjust the bushing position controlling how much of the neck length is sized
- Body die is used in conjunction or separate of neck sizing die to full-length size the case and adjust the shoulder (headspace). This die will not deprime the cartridge case.
- Sliding sleeve on the bullet seater completely captures the case before the bullet seating occurs promoting and enhancing accuracy and bullet seating consistency
- Micrometer head on bullet seater allows you to easily see .001” or less adjustments to seating depth
- Dial back to previous recorded measurements easily. This feature is especially handy during load testing and also when using different bullets in the same firearm.