Forster Neck Reamer

$27.95

Product Options

Qty:

Forster Inside Neck Reamer

The Forster Inside Neck Reamer is intended for use in the Original, Classic and Power Case Trimmers. The Forster Inside Neck Reamer is manufactured from high grade, wear-resistant tool steel, and standard Neck Reamers are ground .0025" to .003" larger than the maximum bullet diameter. The staggered tooth design cuts the brass smoothly without chattering.
Thick case necks can cause high chamber pressures and flyers. The Forster Inside Neck Reamer mounts in the cutter of a Forster Case Trimmer in place of the pilot and removes the excess brass from the neck walls.
Standard Neck Reamers are intended for use after the cases have been fired with a full load and before the neck or full-length sizing operation.

Features:

  • This tool is available in specific sizes to fit the caliber of case you are intending to ream.
  • Includes one case neck reamer to be mounted and used in the cutter head of a Forster standard trimmer.
  • Tool has staggered cutters providing a smooth cut without chattering.
  • Cutter is ground from high grade, wear-resistant tool steel for long life.
  • Standard inside neck reamers are ground .0025" to .003" larger than the maximum bullet diameter.
  • Standard inside neck reamers are intended for use after the cases have been fired with a full load and before the neck or full-length sizing operation has occurred.

Usage:

  • Insert the Forster Inside Neck Reamer into the cutter of a Forster Case Trimmer in place of the pilot.
  • Turn cutter assembly until the Inside Neck Reamer has passed completely through the case neck.
  • Continue to turn the reamer while withdrawing the reamer from the case neck
  • Chamfer and deburr the case mouth after reaming.
  • Size case necks if using standard inside case neck reamers.
Close