Bore Tech AR-15 Complete Upper Cleaning Kit
AR-15s are notorious for collecting brass shavings, powder residue, debris, oil, grease, and solvents in the barrel extension, upper & lower receiver, and trigger group. This accumulation of debris can cause operational malfunctions and increase wear on your bolt, bolt carrier, trigger group, and receiver. In the past, these areas have been difficult or impossible to properly clean. Not anymore! The Bore Tech's AR-15 Complete Receiver Cleaning Kits were designed to provide all the necessary, best performing, professional-grade tools in a single convenient easy to use kit.
The unique AR-15 Receiver Cleaning Kit centers around the exclusive, patent-pending cross-shaped Barrel Extension Wiper, circular-shaped Upper Receiver Wiper and the multipurpose Bolt and Carrier Cleaning Tool.
The cross-shaped Barrel Extension Wiper eliminates clumsy dental rolls and ineffective felts that fall off, barely clean, and pack full of fouling rending them useless. With Bore Tech's Barrel Extension Wiper, simply spike a patch over the wiper and observe how the flexible rubber fingers compress as they pass through the locking lugs and spring open once inside the barrel extension providing a thorough and complete cleaning.
The same principle is utilized with the circular-shaped AR-15 Upper Receiver Wiper. Spike a patch over the wiper and watch how it perfectly conforms to the receiver walls for a thorough and complete cleaning every time.
The multipurpose AR-15 Bolt and Carrier Cleaning Tool can handle everything from extreme fouling to light cleanings. The frontend of the tool focuses on the stubborn carbon buildup inside of the bolt carrier while the back-end focuses on the carbon buildup found on the bolt tail. Two professional cleaning tools in one easy to use, ergonomic handle.
Use the frontend of the Bolt and Carrier Cleaning Tool to loosen the bulk carbon with the 100% safe Carrier Scraper. Then loop the provided green cleaning pads through the tool and use them inside the carrier to perfectly clean away any remaining carbon. Dry the bolt carrier following the same steps with the provided patches. The tool also features an incorporated firing pin scraper for removing the fouling under the firing pin retaining ring.
The same detailed cleaning technique is applied to the back-end of the Bolt and Carrier Cleaning Tool. The integrated, 100% safe bolt tail scraper easily removes stubborn carbon fouling. Then follow with the provided green cleaning pads for a perfect cleaning. Finally, dry with patches in the same fashion and you are done. It is that easy!
The 14 Piece Kit cleans:
|Upper Receiver||Lower Receiver|
|Barrel Extension||Buffer Tube|
|Bolt & Bolt Tail||Firing Pin|
|Bolt Carrier||& More|
- Patent Pending Molded Rubber Wipers Rapidly Clean/Dry Barrel Extension & Upper Using Included Patches
- Exclusive Combination Bolt and Carrier Tool Easily Scrapes, Cleans and Dries Bolt & Bolt Carrier Using Included Green Cleaning Pads & Patches
- Reinforced Polymer Cleaning Pick Safely Cleans Hard To Reach Areas such as the Charging Handle Recess and Trigger Group
- Polymer Rod Guide Effectively Stabilizes The 9" Non-Rotating Rod & Prevents Rod From Contacting Upper
- Proof-Positive Brushes & Loop Quickly Loosen & Clean Stubborn Fouling in the Chamber and Upper
Available for both .223/5.56mm AR-15 & .308/7.62mm AR-10 Platforms
Choose the best... Choose the Bore Tech AR-15 Complete Receiver Cleaning Kit
Bore Tech - Redefining Gun Care
Proudly made in the USA
AR-15 Complete Receiver Cleaning Kit
Packaging: Clear Screw Top Plastic Tube w/ Hang Hole
Dimensions: 27.5" x 1.75" x 1.75"
|Polished Stainless Steel Rod||Molded Rubber Barrel Extension Wiper|
|Polymer Rod Collar||Molded Rubber Upper Receiver Wiper|
|Bolt Carrier Cleaning Tool||Proof-Positive Chamber Brush|
|Bolt Tail Cleaning Tool||Proof-Positive Upper Brush|
|Polymer Cleaning Pick||Proof-Positive Chamber Loop|
|X Count Cotton Patches||Cotton Cleaning Swabs|
|Green Cleaning Pads||Double Ended Nylon Gun Brush|
Rod Length: 9"
Rod Diameter: 0.250"
Rod Thread Pitch: 8/32 Female Threads;
Recommended For Use with Bore Tech C4 Carbon Remover (Not Included)