Creedmoor Sports Multi-Caliber Bullet Comparator
This tool is manufactured in the USA out of high-grade stainless steel and will last a lifetime of use. The comparator features six measurements with each hole being precisely machined for a given bore diameter that matches the bullet caliber. On one side you will see the imperial bullet caliber engrave, on the reverse side is the metric equivalent.
This tool allows you to measure six different calibers simply by rotating the tool, so the desired caliber is in the 6 O'clock position.
Slide the Comparator onto the top jaw of the caliper so your desired measuring hole is in the 6 O'clock position and facing the bottom jaw.
Close the calipers so the bottom jaw rests inside of the grove of the comparator on the recess flat.
With the calipers closed, screw in the two brass thumb screws and tighten finger tight.
Zero your calipers.
Place the bullet on the lower jaw, and close the calipers, the inner diameter of the comparator will contact on the ogive of the bullet.
Care of your Comparator
This comparator is a precision measuring tool, the measuring surfaces have been precision machined. What makes this comparator unique is that the critical surfaces are recessed and protected from accidental bumps or drops. In order to properly care for this tool, store it in the protective case that it shipped in. This will keep the comparator free from dirt and debris.
Stainless Steel is corrosion resistant, not corrosion proof, and sometimes the sweat on your hands can still cause some minor surface corrosion. Occasionally clean the tool and wipe it down with a light coat of oil to preserve the finish after use.