6MM PPC Redding Small Base Redding Type S Bushing Full Die

6mm PPC Small Base Redding Type S Bushing Full Length Die

The Redding Type S Bushing Full-Length Die Set for 6mm PPC is designed for precision reloaders who demand complete control over case sizing and neck tension. This die allows you to fine-tune every aspect of the sizing process, delivering superior concentricity, consistent neck tension, and reliable chambering for competitive and precision shooting applications.

The Type S Full-Length Bushing Sizing Die lets you select neck bushings in .001 inch increments, enabling precise control of external neck sizing. This provides the ability to size the complete body of the case, adjust shoulder bump, and tailor neck tension for optimal bullet grip and consistent chamber pressures. Bushings and shellholder are sold separately.

The decapping rod can be used with a traditional sizing button, recommended for brass that has not been neck turned or sorted by neck wall thickness. For brass that has been neck turned, use the decapping pin retainer in place of the sizing button to size the neck externally only.

For brass that has not been neck turned, select a case with the thinnest neck wall or the smallest loaded outside diameter, and choose a bushing .003 inch to .005 inch smaller than the loaded neck diameter. This minimizes working the brass while ensuring consistent inside neck diameter, uniform bullet grip, and stable chamber pressures.

Includes:

• One Redding Type S Bushing Full-Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
• One die storage box
• Complete instructions

Bushings and shellholder sold separately

Features:

• Precise control of external neck sizing using bushings available in .001 inch increments
• Self-centering bushings for improved concentricity
• Adjustable decapping rod to control bushing position and neck sizing length
• Die can be used as a body die by removing the bushing and internal components