ADG 6.5mm Creedmoor Brass
Carefully read this description! You will likely have to change your load for ADG brass.
ADG 6.5 Creedmoor brass was designed not only for consistency, but for durability. One of the ways ADG accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, ADG brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass. ADG recommmends using a reputable load data source and working up from their recommended minimum starting loads. Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG 6.5 Creedmoor brass and may result in unsafe pressure levels. Ships in its own hard, flip top case. You may take out the foam insert used to protect the brass during shipment and use the box to transport loaded rounds to the range. All brass is tracked with a custom lot number for quality control which is located on the underside of the box.
- Caliber- 6.5 Creedmoor
- Primer pocket size- LRP
- Finish- Standard
- Quanity- 50 count
- Case weight- 169.5 grains (average)
- Case volume- 49.6 grains/H2O (average)
- Neck wall thickness- .0136
Headquartered in Elizabethtown, KY and owned and operated by eight experienced, industry professionals and a staff with over 200 years of combined experience, ADG skill set covers the full spectrum of required disciplines: mechanical engineering, metallurgical engineering, electrical engineering, industrial design, CAD design, and an Associate in Applied Science Degree in Gunsmithing. Utilizing Six Sigma methodologies and procedures, decades of experience, the latest equipment technology available and unrivaled data management, ADG can tackle a broad range of product development challenges, from slight twists on classic designs to the most complex and innovative technologies. Backed by ADG's product development business unit, ADG not only identify underlying issues, they can also determine and implement solutions from design all the way to the production environment. ADG design and metallurgical engineers can provide superior failure analysis, design investigative experiments, and provide design direction.
*The Flip Top Case is considered protective packaging and cannot be replaced if cracked during shipment.