Case trimmers

Brass stretches and flows forward every time you fire and size it. If you don’t trim, your cases will grow past maximum length and the mouth will crimp into the throat as the roun chambers. Pressure inside your gun will climb somewhere you can’t see it happening - which leads to damage to your rifle. A case trimmer stops this by cutting the brass back below the maximum length - and every serious reloader and competition shooter needs one.

Creedmoor Sports stocks case trimmers from L.E. Wilson, Forster, Giraud, Redding, Hornady and Little Crow, alongside our own trimmer platforms, and the case holders, pilots, collets and cutters that keep them working. We also stock a huge range of brass, reloading supplies and dies.

Why cases need to be trimmed

Brass is soft. Every time you fire a case, the brass expands to fill the chamber and grips the walls while the head is driven back against the bolt face. This is what it’s designed to do. However - the action of firing the brass stretches the case just ahead of the web, and the displaced brass has nowhere to go but forward. Full length sizing then squeezes the body back down and pushes more brass toward the neck. The case gets marginally longer each time you fire it.

If a case goes past maximum length, the mouth runs into the end of the chamber as the round is chambered and gets pinched onto the bullet. The bullet cannot release cleanly, pressure rises sharply. This is not only an accuracy issue - it’s a safety issue.

Trim-to length is normally set ten thousandths of an inch below maximum. This gap buys you several firings before the case reaches maximum again - so you’re not having to trim every round every time you fire it.

Where does a case trimmer measure from?

This is something that every case trimmer manufacturer has to decide, and it’s the main reason you’d choose one model over another.

Base indexed. The case is held in a collet or chuck and referenced from the head. The Forster Original and most universal trimmers work this way. They are simple, well proven and inexpensive, and they trim accurately provided your brass is consistent. The catch is that any variation in case body length is passed straight through into your trim length, because the trimmer has no way of knowing about it.

Shoulder indexed. The case is referenced from the shoulder datum instead. L.E. Wilson case holders, the Giraud and the World's Finest Trimmer all work this way. The shoulder is the surface that determines headspace, so it is the reference that actually relates to how the case sits in the chamber.

Trim length stays consistent regardless of how the rest of the case varies, and on the Giraud it removes the need for manual adjustment between cases altogether.

In practice: for match brass, and anywhere you care about consistent neck length and neck tension, shoulder indexed is the more repeatable answer. For mixed or once fired brass being processed in volume, base indexed is perfectly fine - and these usually cost a lot less.

Manual trimmers vs powered or automated

There are any number of reasons why you might choose between these different types of trimmers - mainly to do with cost, but also what you’re firing and how often.

Manual trimmers (Wilson and Forster kits) are the slowest per case, the most controlled and are the most common trimmer on a precision bench. If you trim 100 cases at a time and want to feel every cut, this is what you should go for.

Power adapters let you drive an existing manual trimer using a cordless drill. It’s the cheapest way to increase the speed at which you trim, without changing your existing setup or trim length.

A powered single step trimmer like the Hornady High Speed 3-in-1 spins at over 2,000 rpm and trims, chamfers and deburs in one pass, with a click adjustable micrometer for repeatable settings. It will cover .22 to .30 caliber and case lengths from 1.450 to 3.5 inches.

A high volume case trimmer - like the Giraud Power Case Trimmer - indexes off the shoulder and also trims, chamfers and deburs in one single operation, which is what makes it the ideal choice for anyone processing bottleneck rifle brass by the 1000. It’s available in 110v and 220v, with a 50 BMG case holder and cutter head.

A lathe trimmer - like the Redding Match Precision Trimming Lathe - works on true lathe principles - the cutter stays stationary and the case rotates against it, which produces a square case mouth. An integrated micrometer gives fast, repeatable length changes across a wide range of cartridges.

Creedmoor Sports trimmer platforms

A trimmer that moves on the bench is a trimmer that doesn’t give you replicable results. We build heavy duty mounting platforms for the L.E. Wilson, Forster, Hornady and RCBS Pro trimmers, using robust materials throughout to give a stable base for trimming, with all the hardware needed to mount your trimmer included.

The Wilson platform also stores nine case holders and includes a strong polymer tapping block for knocking cases back out of the holder, which is the part of Wilson trimming that is otherwise fiddly. If you use a trimmer we don’t make a dedicated platform for, the Do It Yourself Customizable Bench Block covers it.

Case holders, pilots, collets and cutters

Wilson case holders come in Rifle Standard and New Rifle Cases versions, the second cut for unfired brass that has not yet been fire formed, plus specialist holders for PPC, PPC oversize, Dasher, RSAUM, Winchester Short Magnum, Winchester Super Short Magnum, standard magnum and Ultramag cases. We also stock the Wilson micrometer adjustment stop, tin coated and replacement cutters, and the hard anodized case holder clamp.

For Forster trimmers we stock pilots, collets for the Original and Power trimmers, cutter shafts, the 3-in-1 case mouth cutter that trims, chamfers and deburrs in one pass, and the long trimmer base for oversized cases. Giraud case holders and cutting heads with blades are stocked separately.

Do you need to trim every time you reload?

No. A lot of reloading advice suggests otherwise, but this isn’t the case.

How fast a case grows depends on the cartridge, the pressure you load to and whether you full length size or bump the shoulder minimally. Straight wall pistol brass barely grows at all and many handloaders never have to trim it. A moderate bottleneck rifle load, neck sized, may give you several firings before it reaches maximum length and needs to be trimmed. A near maximum magnum load, full length sized every time, is probably going to need trimming on every cycle.

The tool you need every time is a caliper. Measure a sample from the batch, compare against the maximum case length for your cartridge, and trim when the measurement says to trim. If you take only one piece of advice from us - buy the trimmer once, and buy a good one - because a cheap trimmer always gets replaced after a few seasons.

Frequently asked questions about case trimmers (FAQs)

Is a case trimmer necessary for reloading?

If you load bottleneck rifle cartridges, then yes - eventually you will need to trim. Cases grow with every firing and sizing cycle, and a case over maximum length is a safety problem rather than an accuracy one. You won’t need to trim every time, but you’ll need to trim eventually.

How do I know when to trim a case?

Measure with a caliper and compare against the maximum case length for your cartridge. Trim when a case reaches maximum, and trim to the published trim-to length, which is normally ten thousandths of an inch below maximum. You won’t be able to tell whether you need to trim or not by eye - so a caliper is absolutely necessary.

What is trim-to length?

The length you cut back to, set below maximum so that the case can grow again over the next few firings without going over. Trimming to maximum rather than trim-to length means trimming again almost immediately.

What is the difference between trimming and chamfering?

Trimming sets the length. Chamfering and deburring clean up the mouth afterwards, inside and out, so the bullet seats without shaving copper and the case feeds cleanly. Several of the powered trimmers we sell do all three in one pass.

Do I need a different case holder for each cartridge?

With Wilson and Giraud trimmers, yes, because the holder is what indexes the case off the shoulder. Base indexed trimmers use a universal collet with cartridge specific pilots instead, which is cheaper to cover multiple cartridges with.

Can I use a drill with a manual trimmer?

Yes. Both Wilson and Forster make power adapters for their trimmers, which is the least expensive way to speed up trimming without changing your setup.